Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Spagnolo

Traduzione in corso passo 3

Passo 3
Use the flat end of a spudger to gently lift the battery connector end of the logic board up. Be careful not to pull against any cables. If you feel resistance, check that all cables, connectors, and components are clear of the board.
Remove the logic board
  • Use the flat end of a spudger to gently lift the battery connector end of the logic board up.

  • Be careful not to pull against any cables. If you feel resistance, check that all cables, connectors, and components are clear of the board.

Usa el extremo plano de un spudger para levantar cuidadosamente el extremo del conector de batería de la placa lógica.

Ten cuidado de no tirar contra ningún cable. Si sientes resistencia, verifica que todos los cables, conectores y componentes estén fuera de la placa.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.