Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Tedesco

Traduzione in corso passo 3

Passo 3
Use the flat end of a spudger to gently lift the battery connector end of the logic board up. Be careful not to pull against any cables. If you feel resistance, check that all cables, connectors, and components are clear of the board.
Remove the logic board
  • Use the flat end of a spudger to gently lift the battery connector end of the logic board up.

  • Be careful not to pull against any cables. If you feel resistance, check that all cables, connectors, and components are clear of the board.

Benutze das flache Ende eines Spudgers, um die Kante des Logic Boards, wo sich der Akkustecker befindet, vorsichtig hochzuheben.

Achte darauf, nicht an irgendwelchen Kabeln zu ziehen. Falls du einen Widerstand spürst, dann kontrolliere, ob alle Kabel, Stecker und Komponenten von der Platine gelöst sind.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.