Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Remove the regulator connector. Use a screwdriver or similar tool to move the clip so that the connector can be simply pulled up. Remove the single wire connector the same way. Remove the 10mm nut that holds the cable to the solenoid onto the alternator
  • Remove the regulator connector. Use a screwdriver or similar tool to move the clip so that the connector can be simply pulled up.

  • Remove the single wire connector the same way.

  • Remove the 10mm nut that holds the cable to the solenoid onto the alternator

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.