Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
First thing is to disconnect the battery. I habitually only disconnect the negative cable. This is the only part that may be difficult. The removal of the serpentine belt requires that the spring loaded belt tensioner gets pulled to the point that it no longer applies tightening pressure onto the belt. It requires a Torx T-50 which I did not have. The proper way would be to insert the  T-50 into the tensioner and then move that into counterclockwise direction to loosen
  • First thing is to disconnect the battery. I habitually only disconnect the negative cable.

  • This is the only part that may be difficult. The removal of the serpentine belt requires that the spring loaded belt tensioner gets pulled to the point that it no longer applies tightening pressure onto the belt. It requires a Torx T-50 which I did not have.

  • The proper way would be to insert the T-50 into the tensioner and then move that into counterclockwise direction to loosen

  • Where there is a will there is a way. Use a 15mm socket on the bolt that holds the idler wheel. Use the ratchet and move that into a counterclockwise direction. This will loosen the tensioner and the belt can now be removed.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.