Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 7

Passo 7
Apply a heated iOpener to the right edge of the phone. Slide the opening pick along the right edge of the display to separate the adhesive underneath.
  • Apply a heated iOpener to the right edge of the phone.

  • Slide the opening pick along the right edge of the display to separate the adhesive underneath.

  • Don't insert the pick more than 1 inch (25 mm) underneath the display to avoid damaging the home button cable.

  • The display and digitizer cables are located near the top of the display and may interfere with your pick if you pry too deeply.

  • Leave the pick in place to prevent the adhesive from re-adhering and grab a second pick as you proceed to the next step.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.