Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Slide the opening pick along the left edge of the display to separate the adhesive underneath. The display and digitizer cables are located near the top of the display and may interfere with your pick if you pry too deeply. If cutting becomes difficult, reheat and reapply the iOpener.
  • Slide the opening pick along the left edge of the display to separate the adhesive underneath.

  • The display and digitizer cables are located near the top of the display and may interfere with your pick if you pry too deeply.

  • If cutting becomes difficult, reheat and reapply the iOpener.

  • Leave the pick in place to prevent the adhesive from re-adhering and grab a second pick as you proceed to the next step.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.