Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Bend the wire around the contact point. Pin numbers are located on the outside of the connector.
  • Bend the wire around the contact point. Pin numbers are located on the outside of the connector.

  • Connect the red wire to Pin 3 and the blue wire to Pin 2.

  • Pin 1 should have a single piece of exposed wire connecting it to the metal plate on the top of the connector (the ground plate).

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.