Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
With those parts aligned, push the connector back into the microphone until the screw lines up with hole in the side of the microphone. Do not push the microphone past this point or the connector may become stuck.
  • With those parts aligned, push the connector back into the microphone until the screw lines up with hole in the side of the microphone.

  • Do not push the microphone past this point or the connector may become stuck.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.