Aggiusta la tua roba

Diritto alla Riparazione

Store

Torna alla Guida
Inglese
Italiano
Passo successivo

Traduzione in corso passo 1

Passo 1
While holding the microphone connector in one hand, and the XLR cable in the other hand, slowly pull them apart. Make sure you are not holding the microphone connector by the wires. Check to make sure all of the internal wires are connected. If you see a disconnected wire, take a look at the connector soldering guide.

  • While holding the microphone connector in one hand, and the XLR cable in the other hand, slowly pull them apart.

  • Make sure you are not holding the microphone connector by the wires.

  • Check to make sure all of the internal wires are connected. If you see a disconnected wire, take a look at the connector soldering guide.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.