Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 7

Passo 7
To remove the trackball, lay the circuit board face down and locate the two prongs as shown in the picture. Use a precision flathead screwdriver to dislodge the prongs from the circuit board and push the prongs through the slots. The trackball should detach from the circuit board.
  • To remove the trackball, lay the circuit board face down and locate the two prongs as shown in the picture.

  • Use a precision flathead screwdriver to dislodge the prongs from the circuit board and push the prongs through the slots. The trackball should detach from the circuit board.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.