Aggiusta le tue cose Community Store

Remplacement de la trackball du HTC myTouch 3G

Torna alla Guida
Inglese
Francese
Passo precedente Passo successivo

Traduzione in corso passo 2

Passo 2
HTC myTouch 3G Trackball Replacement: passo 0, immagine 1 di 2 HTC myTouch 3G Trackball Replacement: passo 0, immagine 2 di 2

  • Remove the four 6-mm Torx screws located at the corners of the phone and set them aside.

  • Remove the two 4-mm Torx screws located at the two long sides toward the middle of the phone. Set them aside.

  • Keep the two sets of screws separated. This will ensure correct placement of the screws during reassembly.

Retirez les quatre vis Torx de 6 mm situées aux coins du téléphone et mettez-les de côté.

Retirez les deux vis Torx de 4 mm situées sur les deux côtés longs vers le milieu du téléphone. Mettez-les de côté.

Gardez les deux jeux de vis séparés. Cela garantira un placement correct des vis lors du remontage.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.