Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Identify the two mounting bolts on the rear of the caliper. Using a 12 mm wrench or socket, remove the two caliper mounting bolts. Alternatively, you may remove only the bottom mounting bolt and, using the top bolt as a hinge, rotate the caliper up and away from the rotor to access the brake pads. If you do this, skip the next step.
  • Identify the two mounting bolts on the rear of the caliper.

  • Using a 12 mm wrench or socket, remove the two caliper mounting bolts.

  • Alternatively, you may remove only the bottom mounting bolt and, using the top bolt as a hinge, rotate the caliper up and away from the rotor to access the brake pads. If you do this, skip the next step.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.