Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Remove the single T10 Torx screw holding the right speaker to the logic board. Lift the right speaker out of the iMac and let it hang down as you work on the Bluetooth board.
  • Remove the single T10 Torx screw holding the right speaker to the logic board.

  • Lift the right speaker out of the iMac and let it hang down as you work on the Bluetooth board.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.