Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 1

Passo 1
Use the point of a spudger to disconnect the front-facing camera connector. Use the point of a spudger to disconnect the front-facing camera connector.
  • Use the point of a spudger to disconnect the front-facing camera connector.

断开在主板上的白色线缆的接头。

当所有接头都断开了之后,用塑料撬棍在边缘分离主板。

主板的边缘一般都位于手机外壳的边缘,因此在撬的时候要小心。首先尝试分离主板的上部分。

从设备上移下主板。

[* red] Disconnect the white cable attached to the board.
[*
black] Once all tabs are disconnected, useUse the plastic opening toolpoint of a spudger to seperate the motherboard from the edges.
[* icon_note] The perimeter of the motherboard is often positioned under the edge of the phone casing, so be careful when prying. Attempt to seperate the top portion of the motherboard first.
[* black] Remove the motherboard from
disconnect the devicefront-facing camera connector.
[* red] Disconnect the white cable attached to the board.
[*
black] Once all tabs are disconnected, useUse the plastic opening toolpoint of a spudger to seperate the motherboard from the edges.
[* icon_note] The perimeter of the motherboard is often positioned under the edge of the phone casing, so be careful when prying. Attempt to seperate the top portion of the motherboard first.
[* black] Remove the motherboard from
disconnect the devicefront-facing camera connector.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.