Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Using the plastic spudger, separate the cosmetic stickers from the bottom left and right of the frame. Using the Phillips #0 screwdriver, remove two 2mm screws, one on each side. Then remove the plastic covering the edge of the screen. Continuing with the Phillips #0 screwdriver, remove four 2mm screws that hold the screen in place.
  • Using the plastic spudger, separate the cosmetic stickers from the bottom left and right of the frame.

  • Using the Phillips #0 screwdriver, remove two 2mm screws, one on each side. Then remove the plastic covering the edge of the screen.

  • Continuing with the Phillips #0 screwdriver, remove four 2mm screws that hold the screen in place.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.