Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 5

Passo 5
Peel the backing off of the adhesive back of the small temperature sensor board. Adhere the temperature sensor board to an exposed, metal area of the surface of the SSD, as close as possible to the SATA connector. Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure.
  • Peel the backing off of the adhesive back of the small temperature sensor board.

  • Adhere the temperature sensor board to an exposed, metal area of the surface of the SSD, as close as possible to the SATA connector.

  • Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure.

掀起小型温度传感器板背面粘合层保护膜的一角

将温度传感器板粘贴到SSD表面暴露出来的金属区域,并尽可能地靠近SATA连接器。

折叠多余的温度传感器电线,以便在安装硬盘盒时不会受到影响。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.