Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 23

Passo 23
Slide the metal plate covered latch component back onto the assembly, making sure to engage that white round plastic portion from the main assembly into the notch in the latch component. Secure the bolt back in through the metal plate and also install the remaining screw on the back side.
Re-attach the latch component
  • Slide the metal plate covered latch component back onto the assembly, making sure to engage that white round plastic portion from the main assembly into the notch in the latch component.

  • Secure the bolt back in through the metal plate and also install the remaining screw on the back side.

  • Re-install the weatherstrip around the latch mechanism edge where it was removed.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.