Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 17

Passo 17
Remove the plastic cover on the edge of the actuator by slipping a flatblade screwdriver under the lip or lifting up at the lip of the cover where the holes are slipped over the plastic posts. There are posts on both sides of the assembly. There is also a flat plastic cover adjacent to the edge cover.  Go ahead and pop that cover as well.
Disassemble the door lock actuator
  • Remove the plastic cover on the edge of the actuator by slipping a flatblade screwdriver under the lip or lifting up at the lip of the cover where the holes are slipped over the plastic posts.

  • There are posts on both sides of the assembly.

  • There is also a flat plastic cover adjacent to the edge cover. Go ahead and pop that cover as well.

  • Set the plastic covers aside for reassembly.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.