Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 16

Passo 16
Continue releasing the adhesive all the way along the bottom edge of the iPad. On iPad 4 models, insert the pick to a maximum depth of 1/2 inch (10 mm) in this area, to avoid damaging the home button ribbon cable.
  • Continue releasing the adhesive all the way along the bottom edge of the iPad.

  • On iPad 4 models, insert the pick to a maximum depth of 1/2 inch (10 mm) in this area, to avoid damaging the home button ribbon cable.

  • Leave the opening pick wedged underneath the front glass near the home button.

Continuez à décoller l'adhésif tout le long du bord inférieur de l'iPad.

Si vous avez un iPad 4, insérez au maximum 1,2 cm du médiator dans cette zone pour éviter d'endommager la nappe du bouton home.

Laissez le médiator coincé sous la vitre frontale à côté du bouton home.

[* black] Continue releasing the adhesive all the way along the bottom edge of the iPad.
- [* icon_caution] On iPad 4 models, insert the pick to a maximum depth of 1/2 inch in this area, to avoid damaging the home button ribbon cable.
+ [* icon_caution] On iPad 4 models, insert the pick to a maximum depth of 1/2 inch (10 mm) in this area, to avoid damaging the home button ribbon cable.
[* black] Leave the opening pick wedged underneath the front glass near the home button.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.