Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 16

Passo 16
Continue releasing the adhesive all the way along the bottom edge of the iPad. On iPad 4 models, insert the pick to a maximum depth of 1/2 inch (10 mm) in this area, to avoid damaging the home button ribbon cable.
  • Continue releasing the adhesive all the way along the bottom edge of the iPad.

  • On iPad 4 models, insert the pick to a maximum depth of 1/2 inch (10 mm) in this area, to avoid damaging the home button ribbon cable.

  • Leave the opening pick wedged underneath the front glass near the home button.

Continúe soltando el adhesivo todo el camino a lo largo del borde inferior del iPad.

En los modelos de iPad 4, inserte la selección a una profundidad máxima de 1/2 pulgada en esta área, para evitar dañar el cable de cinta del botón de inicio.

Deje la selección de abertura apretada debajo del cristal frontal cerca del botón de inicio.

[* black] Continue releasing the adhesive all the way along the bottom edge of the iPad.
- [* icon_caution] On iPad 4 models, insert the pick to a maximum depth of 1/2 inch in this area, to avoid damaging the home button ribbon cable.
+ [* icon_caution] On iPad 4 models, insert the pick to a maximum depth of 1/2 inch (10 mm) in this area, to avoid damaging the home button ribbon cable.
[* black] Leave the opening pick wedged underneath the front glass near the home button.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.