Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Turn your controller 90 degrees clockwise and insert a plastic opening tool into the crease of the back panel. Push down on the end of the plastic opening tool closest to you to lift the panel up.
  • Turn your controller 90 degrees clockwise and insert a plastic opening tool into the crease of the back panel.

  • Push down on the end of the plastic opening tool closest to you to lift the panel up.

  • Slide the plastic opening tool around the perimeter of the back panel until you can remove it.

  • You may hear loud popping noises as the back panel separates from the controller.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.