Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Continue prying the audio control cable up from the rear case. If your replacement part doesn't include the metal bracket, use a heat gun or hair dryer to soften the adhesive on the audio control cable and peel it off of the metal bracket with a spudger. If your replacement part doesn't include the metal bracket, use a heat gun or hair dryer to soften the adhesive on the audio control cable and peel it off of the metal bracket with a spudger.
  • Continue prying the audio control cable up from the rear case.

  • If your replacement part doesn't include the metal bracket, use a heat gun or hair dryer to soften the adhesive on the audio control cable and peel it off of the metal bracket with a spudger.

Continuate a sollevare il cavo del controllo audio dal pannello posteriore.

Se la parte di ricambio non include il supporto di metallo usa una pistola termica o un asciugacapelli per ammorbidire l'adesivo sul cavo del controllo audio, poi staccalo dalla staffa metallica con uno spudger.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.