Salta al contenuto principale

iPhone 5s/5c/SEのバッテリー接着ストリップの交換

Inglese
Giapponese

Traduzione in corso passo 2

Passo 2
iPhone 5s, 5c, and SE Battery Adhesive Strips Replacement: passo 0, immagine 1 di 3 iPhone 5s, 5c, and SE Battery Adhesive Strips Replacement: passo 0, immagine 2 di 3 iPhone 5s, 5c, and SE Battery Adhesive Strips Replacement: passo 0, immagine 3 di 3
  • Peel off the large blue film liner and remove it from the adhesive strips completely.

  • Take care not to accidentally touch the adhesive strips after this step. The adhesive is good for one use. If it sticks to your finger or another surface accidentally, it must be discarded and replaced.

  • The blue film sometimes has a defect that prevents it from peeling off, and the strips have to be discarded and replaced.

  • If this happens to you and you got your strips from iFixit, contact us here and we'll send you a replacement on the double.

  • In the meantime, you can temporarily reassemble your iPhone with a bit of double-sided tape to hold the battery.

接着ストリップから大きな青色のフィルムライナーを剥がします。

この手順の後に、誤って接着ストリップに触れないように注意してください。接着ストリップは1回だけしか使えません。誤って指や何かが表面に装着してしまった場合は、別のストリップに交換する必要があります。

まれですが、青いフィルムが剥がれない欠陥品があることがあります。その際は、フィルムを破棄して別のフィルムに交換してください。

もしiFixitから購入したストリップに欠陥がある場合は、こちらまで連絡をしてください。直ちに交換品を送ります。

それまでの間、小さく切った両面テープでバッテリーを固定し、iPhoneを仮で再組み立てすることができます。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.