Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Locate the screws that mount the wheel extension to the Robot. Unscrew the four 11mm screws indicated with a Torx T10 screwdriver to remove the frame. Make sure to remove the metallic weight. However, this does not require the removal of any screws.
  • Locate the screws that mount the wheel extension to the Robot.

  • Unscrew the four 11mm screws indicated with a Torx T10 screwdriver to remove the frame.

  • Make sure to remove the metallic weight. However, this does not require the removal of any screws.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.