Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Remove the four screws that secure the hard drive assembly to the computer base. Using the pull-tab, slide the hard drive towards the left to disconnect the hard drive assembly from the connector on the system board. Lift the hard drive assembly out of the computer base.
  • Remove the four screws that secure the hard drive assembly to the computer base.

  • Using the pull-tab, slide the hard drive towards the left to disconnect the hard drive assembly from the connector on the system board.

  • Lift the hard drive assembly out of the computer base.

  • Remove the four screws that secure the hard drive cage to the hard drive.

  • Lift the hard drive off the hard drive cage.

  • Pull the interposer to disconnect it from the hard drive.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.