Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
While looking at the bottom of the device upside down from the front, the secondary hard drive is in the near, left corner. Using a Phillips #1 screwdriver, remove the two 7mm screws on the right side of the cover.
  • While looking at the bottom of the device upside down from the front, the secondary hard drive is in the near, left corner.

  • Using a Phillips #1 screwdriver, remove the two 7mm screws on the right side of the cover.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.