Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Use the opening tool to pry up and disconnect the Lightning connector cable connector from its socket on the logic board. Use the opening tool to pry up and disconnect the Lightning connector cable connector from its socket on the logic board.
  • Use the opening tool to pry up and disconnect the Lightning connector cable connector from its socket on the logic board.

Stacca con cautela e rimuovi il cavo di terra dal bordo del jack cuffie.

Fai attenzione a non perdere la guarnizione di plastica tra il connettore cuffie e l'involucro esterno. Nel riposizionare il connettore cuffie, accertati di riposizionare correttamente anche questa guarnizione.

[* black] Carefully peel off and remove the grounding cable from the edge ofUse the headphone jack.
[* black] Take care not
opening tool to losepry up and disconnect the plastic gasket between the headphoneLightning connector andcable connector from its socket on the outer shell. While aligning the headphone connector, make sure to align this gasket correctlylogic board.
[* black] Carefully peel off and remove the grounding cable from the edge ofUse the headphone jack.
[* black] Take care not
opening tool to losepry up and disconnect the plastic gasket between the headphoneLightning connector andcable connector from its socket on the outer shell. While aligning the headphone connector, make sure to align this gasket correctlylogic board.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.