Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 6

Passo 6
Angle the Lightning connector assembly and pull it out of its recess. Remove the four metal washers and set them aside for reassembly. Before reassembly, use the opening tool or the flat end of a spudger to remove all adhesive residue from the rear case. You can use high-concentration isopropyl alcohol to help with the stubborn spots.
  • Angle the Lightning connector assembly and pull it out of its recess.

  • Remove the four metal washers and set them aside for reassembly.

  • Before reassembly, use the opening tool or the flat end of a spudger to remove all adhesive residue from the rear case. You can use high-concentration isopropyl alcohol to help with the stubborn spots.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

[* black] Angle the Lightning connector assembly and pull it out of its recess.
[* red] Remove the four metal washers and set them aside for reassembly.
[* icon_reminder] Before reassembly, use the opening tool or the flat end of a spudger to remove all adhesive residue from the rear case. You can use high-concentration isopropyl alcohol to help with the stubborn spots.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.