Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 7

Passo 7
Heat an iOpener and apply it to the display cable side of the display. Insert an opening pick into the gap along the display cable edge of the display, just below the display cable. As with the first edge, make sure the opening pick slides into the gap on top of the pink shield layer.
  • Heat an iOpener and apply it to the display cable side of the display.

  • Insert an opening pick into the gap along the display cable edge of the display, just below the display cable.

  • As with the first edge, make sure the opening pick slides into the gap on top of the pink shield layer.

  • Slide the pick down the edge of the display, stopping before you reach the daughterboard.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.