Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 5

Passo 5
Insert an opening pick no more than 0.25  inches (~6 mm) into the bottom battery-side corner of the display, near the top of the daughterboard. Slide the pick around the corner of the display, stopping before you reach the "recent" button ribbon cable. If you do break either of the capacitive buttons or ribbon cables, you can replace the daughterboard assembly, which includes new capacitive buttons.
  • Insert an opening pick no more than 0.25 inches (~6 mm) into the bottom battery-side corner of the display, near the top of the daughterboard.

  • Slide the pick around the corner of the display, stopping before you reach the "recent" button ribbon cable.

  • If you do break either of the capacitive buttons or ribbon cables, you can replace the daughterboard assembly, which includes new capacitive buttons.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.