Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Pull the flash capacitor out of its compartment to expose the wires connected to it. Cut the connecting wires with wire cutters. Solder the wires to the new power source with a soldering iron and electrical solder.
  • Pull the flash capacitor out of its compartment to expose the wires connected to it.

  • Cut the connecting wires with wire cutters.

  • Solder the wires to the new power source with a soldering iron and electrical solder.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.