Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Using the Phillips #1 driver, remove the 7.0mm screw holding the contact in place. Pulling lightly on the contact, remove it and its brace from the motherboard. Pulling lightly on the contact, remove it and its brace from the motherboard.
  • Using the Phillips #1 driver, remove the 7.0mm screw holding the contact in place.

  • Pulling lightly on the contact, remove it and its brace from the motherboard.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.