Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Using the Phillips #1 driver, remove the two 9.5mm screws located on either sides of the head near the ears. The pink brackets are not attached to the screws but will likely come out with the screws. Take care to ensure that the brackets do not get lost.
  • Using the Phillips #1 driver, remove the two 9.5mm screws located on either sides of the head near the ears.

  • The pink brackets are not attached to the screws but will likely come out with the screws. Take care to ensure that the brackets do not get lost.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.