Salta al contenuto principale

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 6le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Remove the ZIF connected ribbon cables for the touchpad and keyboard by gently lifting the latch on the connector point, then slide the ribbon cable out. Repeat for each cable. Verify all ribbon cables are disconnected and out of the way, and lift the keyboard out of the assembly. Verify all ribbon cables are disconnected and out of the way, and lift the keyboard out of the assembly.
  • Remove the ZIF connected ribbon cables for the touchpad and keyboard by gently lifting the latch on the connector point, then slide the ribbon cable out. Repeat for each cable.

  • Verify all ribbon cables are disconnected and out of the way, and lift the keyboard out of the assembly.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.