Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
On the bottom half of the device's head, locate the two screws on each side of the speaker. Using the Phillips #1 driver remove the two 7mm screws. Remove the black brace holding the speaker by gently pulling on it. The speaker will likely fall out after lifting the black brace. Remove the black brace holding the speaker by gently pulling on it. The speaker will likely fall out after lifting the black brace.
  • On the bottom half of the device's head, locate the two screws on each side of the speaker. Using the Phillips #1 driver remove the two 7mm screws.

  • Remove the black brace holding the speaker by gently pulling on it. The speaker will likely fall out after lifting the black brace.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.