Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Locate the gray rubber contact in the middle of the bottom half of the device. Using the spudger, lift one corner of the contact until it pops loose. Grab the contact and gently pull until the other side detaches. When replacing the contact pad, use the narrow leads on the pad to pull it into place by twisting around the tips of the tweezers.
  • Locate the gray rubber contact in the middle of the bottom half of the device. Using the spudger, lift one corner of the contact until it pops loose.

  • Grab the contact and gently pull until the other side detaches.

  • When replacing the contact pad, use the narrow leads on the pad to pull it into place by twisting around the tips of the tweezers.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.