Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Now that you have removed the flash assembly, it is time to remove the motherboard. First, the three remaining ribbon connectors should be gently disconnected.  They are both located on the upper right side of the motherboard.
  • Now that you have removed the flash assembly, it is time to remove the motherboard.

  • First, the three remaining ribbon connectors should be gently disconnected. They are both located on the upper right side of the motherboard.

  • The foam on second ribbon connector must be pulled back to remove it. Do this gently as to not damage the connector or the foam. There is a small switch under the foam that must be flipped up before the connector can be removed.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.