Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 6

Passo 6
Notice the two connections attaching the back of the camera to the motherboard. To disconnect the white wire, pinch the wire casing and pull directly out from the camera. It will take a very small amount of elbow grease. However, do not force or pry it. To disconnect the ribbon connector, softly pull the back away from the motherboard. It should come undone with little force.
  • Notice the two connections attaching the back of the camera to the motherboard.

  • To disconnect the white wire, pinch the wire casing and pull directly out from the camera. It will take a very small amount of elbow grease. However, do not force or pry it.

  • To disconnect the ribbon connector, softly pull the back away from the motherboard. It should come undone with little force.

  • Once removed, set the back in a safe place.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.