Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Use the ESD safe tweezers to push the connector and metal shroud out from the back of the connector. Remove the third and fourth wires from the right of the connector (as seen when looking from the angle in the photo). They should be red and black respectively.
  • Use the ESD safe tweezers to push the connector and metal shroud out from the back of the connector.

  • Remove the third and fourth wires from the right of the connector (as seen when looking from the angle in the photo). They should be red and black respectively.

  • DO NOT attempt to pull the wire from the connector, it will pull the wire from the metal shroud shown in the red box, which needs to be preserved for the connection to be successful.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.