Skip to main content
Inglese
Italiano

Traduzione in corso passo 4

Step 4
Rear cover is fastened on with eleven screws through sheet metal, cruciform drive recess.  PHILLIPS #2 seems to fit.  High torque is not involved, so fit is not important.  Remove screws, rear cover. Thermal fuse / thermal overload device (TOD) is located outside of insulation envelope, fastened on with two screws (cruciform drive recess (PHILLIPS #2 seems to fit), moderate torque). Disconnect fuse/TOD.  when replacing: Orientation does not matter, as it carries mains AC.
remove fuse
  • Rear cover is fastened on with eleven screws through sheet metal, cruciform drive recess. PHILLIPS #2 seems to fit. High torque is not involved, so fit is not important. Remove screws, rear cover.

  • Thermal fuse / thermal overload device (TOD) is located outside of insulation envelope, fastened on with two screws (cruciform drive recess (PHILLIPS #2 seems to fit), moderate torque).

  • Disconnect fuse/TOD. when replacing: Orientation does not matter, as it carries mains AC.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.