Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Remove the two 10mm Phillips #2  screws on the back of the green printed circuit board. If the circuit board needs to be replaced, locate where the two white wires are soldered to the board, and de-solder the connection. If the circuit board needs to be replaced, locate where the two white wires are soldered to the board, and de-solder the connection.
  • Remove the two 10mm Phillips #2 screws on the back of the green printed circuit board.

  • If the circuit board needs to be replaced, locate where the two white wires are soldered to the board, and de-solder the connection.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.