Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Remove the two  rubber feet with arrows by them on the back side to uncover two screws. Unscrew the four silver 4.4mm long screws near the hard drive. Unscrew the remaining nine black 6.5mm long screws. Then remove the back casing using a pry tool if needed.
  • Remove the two rubber feet with arrows by them on the back side to uncover two screws.

  • Unscrew the four silver 4.4mm long screws near the hard drive.

  • Unscrew the remaining nine black 6.5mm long screws. Then remove the back casing using a pry tool if needed.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.