Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Use the PH1 Screwdriver to remove the two screws (7 mm) which hold the fan in place. Use the PH1 Screwdriver to remove the two screws (7 mm) which hold the fan in place. Use the PH1 Screwdriver to remove the two screws (7 mm) which hold the fan in place.
  • Use the PH1 Screwdriver to remove the two screws (7 mm) which hold the fan in place.

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.