Skip to main content
Inglese
Italiano

Traduzione in corso passo 4

Step 4
Disconnect both of the following connectors from the logic board:
  • Disconnect both of the following connectors from the logic board:

  • Sleep sensor cable.

  • Power button cable.

  • Be sure to pull only parallel to the face of the logic board, as pulling up on the socket will break it off the logic board.

  • When pulling these connectors away from their sockets, it is helpful to use your fingernails to pull on the ears at each side of the connector.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.