Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Remove all five triangular screws located on the backside of the leg. Remove the Phillips head screw holding the white leg bracket. The white bracket MUST be re-connected in the same orientation. Make sure to note which side is up and down. The part looks symmetric to the blind eye but it is not.
  • Remove all five triangular screws located on the backside of the leg.

  • Remove the Phillips head screw holding the white leg bracket.

  • The white bracket MUST be re-connected in the same orientation. Make sure to note which side is up and down. The part looks symmetric to the blind eye but it is not.

  • Detach the plastic mount at the top of the leg by sliding it in a vertical motion from the position shown.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.