Skip to main content
Inglese
Italiano

Traduzione in corso passo 1

Step 1
Remove the four 2.0 mm Phillips screws  of the camera using the J00 bit from the 54-bit Driver Kit. There are two screws on both sides. Remove the four 2.0 mm Phillips screws  of the camera using the J00 bit from the 54-bit Driver Kit. There are two screws on both sides. Remove the four 2.0 mm Phillips screws  of the camera using the J00 bit from the 54-bit Driver Kit. There are two screws on both sides.
  • Remove the four 2.0 mm Phillips screws of the camera using the J00 bit from the 54-bit Driver Kit. There are two screws on both sides.

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.