Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 11

Passo 11
Use the 2.0 mm flathead to flip up the two tabs on the motherboard and carefully unseat the ribbon cables Unscrew the three silver 1.0 mm screws with a Phillips #000 screwdriver Carefully lift the lens assembly out of the camera
  • Use the 2.0 mm flathead to flip up the two tabs on the motherboard and carefully unseat the ribbon cables

  • Unscrew the three silver 1.0 mm screws with a Phillips #000 screwdriver

  • Carefully lift the lens assembly out of the camera

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.