Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 14

Passo 14
Use the tip of the 2.0 mm flathead screwdriver to flip up the tab on the ribbon cable, then carefully unseat the ribbon cable Unscrew the two silver 1.0 mm screws with a Phillips #000 Use the tip of the 2.0 mm flathead screwdriver to disengage the two plastic tabs, and carefully lift the motherboard out of place
  • Use the tip of the 2.0 mm flathead screwdriver to flip up the tab on the ribbon cable, then carefully unseat the ribbon cable

  • Unscrew the two silver 1.0 mm screws with a Phillips #000

  • Use the tip of the 2.0 mm flathead screwdriver to disengage the two plastic tabs, and carefully lift the motherboard out of place

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.