Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 8

Passo 8
Take the new circle pad assembly and insert the cable back into the open ZIF connector and close it using the spudger. Ensure the internal component of the circle pad is correctly oriented with a small screwdriver or spudger. Gently place the new circle pad back into its place and secure with the screws.
  • Take the new circle pad assembly and insert the cable back into the open ZIF connector and close it using the spudger.

  • Ensure the internal component of the circle pad is correctly oriented with a small screwdriver or spudger.

  • Gently place the new circle pad back into its place and secure with the screws.

  • We had to try this step a few times before we were able to orient it correctly. Try to make sure that the circle pad does not move the internal assembly once it is inserted.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.