Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 5

Passo 5
Remove the two rubber bumpers on the back of the device with a thumb tack. Using the Phillips #00 screwdriver, remove all 8 of the screws holding the bottom cover to the motherboard. Lift off the bottom cover, being sure not to disconnect the two ZIF connectors for the L/R buttons on the back of the device.
  • Remove the two rubber bumpers on the back of the device with a thumb tack.

  • Using the Phillips #00 screwdriver, remove all 8 of the screws holding the bottom cover to the motherboard.

  • Lift off the bottom cover, being sure not to disconnect the two ZIF connectors for the L/R buttons on the back of the device.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.